Customization: | Available |
---|---|
Usage: | Mobile phone, Power Amplifier Module |
Type: | Wireless |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item | target | remark | |
Frequency |
5150-5350MHz/5700-5900MHz
|
||
Working volatge | 30V | 28-32V | |
Max output power | 49±1dBm | ||
Working current | 7.5A | @80W typical case | |
Controllable output power | 50-100W | ||
ALCpower regulation range | ≥3dB | Voltage-controlled attenuation |
|
Gain | 50±1.0dB | ||
Intraband fluctuation | ±2dB | Peak to peak | |
Max allowable input | ≥+10dBm | Lasts for 1 minute without damage | |
Input volatge standing wave ratio | ≤1.50 | Add +28V,standard network output-10dBm | |
Input volatge standing wave ratio | ≤1.50 | Without power on,standard network output -10dBm | |
≤1.50 | Power on, dual directional coupler test | ||
Temperature testing | Working environment temperature(ºC) | -10~+55ºC | Low temperature can start,monitoring is normal |
Gain stability | ±1.5dB@-10ºC~+55ºC | ||
Power stability | ±1.5dB@-10ºC~+55ºC | ||
power supply requirement | ≥8A @+30Vdc; | Continuous wave output 100W | |
Power supply,control interface 7W2 | A1:VCC+28V; A2:GND 1:TEMP_AL: temperature alarm 2:RUN: Running instructions. Power, high level. No power, low level. 3: VSWR_AL:vswr alarm, high level alarm, low level elimination; 4:PA_EN : Enable switch; High level 3V~5V open, low level <2V closed; |
||
RF output connector | N-F | ||
Module protection | Temperature compensation, over temperature protection, vswr protection |
||
Signal source input |
Built-in high-speed noise modulation signal source
|
||
|
POWER: indicates the power supply indicator. RUN: indicates the power running indicator. VSWR: indicates the standing wave alarm indicator |