400-6000MHz 100W High Efficiency Solid State Power Amplifier RF Anti Drone Module

• Customization: Available
• Frequency Range: GSM900
• Frequency: 400-6000MHz
• Model NO.: ZD-PA- 400/6000M-100W
• Application: Signal Jammer
• Frequency Band: 400-6000MHz
• Working Voltage: AC100-240V or 12V Car Charger (300mm Long)
• Running Temperature: -20ºC to +70ºC
• Weight: 6kg
• Antenna: 300mm Long
• Gain: 50dB
• Connector: SMA
• Impedance: 50ohm
• Power Current: 11A
• RF Connector: N-Female or Other Customized
• Model No: Zd-PA-400-6000MHz
• Monitor Interface: RS-485 or RS232 or Other Customized
• Input Power: <20dBm
• in-Band Ripple(dB): <2dB
• Watts: 100W
• Transport Package: by Box
• Specification: 220 x 140x70mm (Main Unit only, do not include An
• Trademark: ZD TECH
• Origin: China
• HS Code: 8543209090
• Production Capacity: 2000pieces/Month

Product Description

Detailed Photos

 

Product Description:

0.4-6GHz 100W Solid State Power Amplifier

Product Description
The ZD-004060545 is a 0.4-6GHz, saturated power 50dBm high gain solid state power amplifier with state-of-art GaN design technology. lt has higher saturated output power while keeping higher PidB and better linearity, and can adapt to a variety of different signal modes such as continuous wave, pulse, wide instantaneous bandwidth signal high-order modulation signal and etc. lt is designed for applications, such as 5G, LTE, WIFl, EMC testing and etc.
Function

1. Amplifying signal within 0.4-6GHz
2. Over-heating, over-current, over-VSWR, protection functions

Eletrical aspecification
 

Frequency range		0.4-6GHz
Saturated Output Power		dBm		Typ./Min.		51/49@ Pin=0dBm
P1dB		dBm		Typ./Min.		47/44
Gain		dB		Typ./Min.		51/49@ Pin=0dBm
Gain Flatness		dB		Typ.		±2.5@ Pin=0dBm
Small Signal Gain		A		Typ.		64@ Pin=-40dBm
Small Signal Gain Flatness		:1		Typ.		±3.5@ Pin=-40dBm
Isolation@ Disable Status				Typ.		90
Input Power		dBm		Typ.		0
2nd Harmonic Suppression		dBc		Typ./Max.		-20/-15@ Pout=45dBm
3rd Harmonic Suppression		dBc		Typ./Max.		-25/-20@ Pout=45dBm
Spurious Suppression		dBc		Typ./Max.		-70/-65@ Pout=45dBm
Input VSWR		:1		Typ./Max.		1.5/2
Supply Voltage		V		Typ.		32
Power Consumption		W		Typ./Max.		550@ Pin=0dBm
Input Power		Pin≤10dBm (Input RF level without damage)
Load VSWR		VSWR≤3:1 (The power amplifier is undamaged)
Thermal Degradation		75ºC
RF Connector		Input: SMA [F]; Output:TYPE N [F]
Power supply Connector		D-Sub 7W2
Control Connector		D-Sub 7W2
Dimension		mm		276.0x206.5x100.0 (LxWxH) (tolerance: ±0.5)
Weight		g		Max.		6000
Finishing		Alloy iridite
Temperature		Operating: -10ºC~+55ºC; Storage: -40ºC~+75ºC
Heat Dissipation		Unit is cooled by air-forced condition
Waterproof Drade		IP67
Environmental^1		N/A

Note: 1. Altitude, vibration and shock are designed with considerations, but without tests and experiments.
Outline Drawing

Interface Connector Pin Out
D-Sub 7W2

A1.		GND		Ground
A2.		VDD		32 VDC
1		Current Sensor		Analog voltage relative to IDD @ 100 mV per Ampere
2		Temperature Sensor		Analog voltage relative to Module's Temperature @ 10 mV/°C
3		Enable		Amplifier Disable: TTL Logic High (3.3 V), Internally pull down
4		GND		Ground
5		N/C		No Connection