|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Usage: | Mobile phone, Power Amplifier Module |
| Type: | Wireless |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Indicator Items | Downlink | Uplink | Remark |
Operating Frequency | 5600-5800MHz | 5600-5800MHz | |
Output Power | 40±0.5dBm | 15dBm | |
Gain | 45±1.5dB | 25±1.0dB | |
Noise Figure | ≤15 | ≤3 | |
Flatness | ≤3dB | ≤2dB | |
PA Voltage | 32V | ||
Power Conversion Efficiency | >15% | @52dbm | |
Gain Adjustment Step Size | 1.0 | Not supported | |
Numerical Control Regulation Error (1-16dB) | ≤1.0 | Not supported | |
Spurious Emission | In-Band: ≤-36dBm | Tested with CW signal at the center frequency and output power set to maximum | |
Out-of-Band: 9KHz-1GHz | No Clutter Above Normal Noise Floor | ||
1G-12.75GH | |||
EVM | ≤10% | ≤1.2% | Dynamic testing @40dbm |
ACLR | ≤-35dBc | ||
Maximum Allowable Input Power | ≤+10dBm | ≤-10dBm | No damage occurs for continuous operation for 1 min |
Input/Output VSWR | ≤1.5 | ||
Switching Delay | ≤2us ≤4.8us | ||
Ambient Temperature (℃) | -10-+55℃ | Starts normally at low temperatures, monitoring works normally | |
Gain Stability | ±2 @-10℃-+55℃ | ||
Power Stability | ±1.5 @-10℃-+55℃ | ||
Current | ≤2.5A@32V | ||
Power Interface | KF2EDG5.08-4P | Male Connector | |
Monitoring Interface | XH2.54-8P | Male Connector | |
RF Input/Output Connectors | RF-IN/LAN OUT/ANT | N-K/MCX-K | |
Uplink/Downlink Switching Methods | TX_EN and RX_EN signal | 10 indicates transmit state, 01 indicates receive 00: Power amplifier and receive are both off. Simultaneous setting to 11 is prohibited | |
){kind=link}