Customization: | Available |
---|---|
Usage: | Signal Jammer |
Type: | Wireless |
Still deciding? Get samples of US$ 4000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The main feature of this dual-digital module technology is that it combines the extremely fast frequency conversion speed and high frequency resolution of the DDS module and the low output phase noise and wide output bandwidth of the PLL, which makes it possible to transmit broadband digital at the same time, it can also be sent to up to 8 narrow-band, the drone's mapping is now broadband, but there are still a lot of digital signals through the remote control, so in order to completely control the drone, we need to have both broadband digital and narrowband digital together, so that the drone can be controlled by the PLL. So now, in order to control the drone completely, it is necessary to use both wideband and narrowband digital signals together, so as to achieve the best results.
Dual Digital Drone Jammer
Jamming technology |
DDS+PLL jamming technology |
||
Basic principle |
The jammer applies DDS+PLL jamming technology. It can jam 7 frequency bands. It can block navigation, telemetry and remote control signal of drones 44dBm 44dBm 44dBm |
||
Jamming frequency bands |
420-470 DDS, PLL on 434±1MHz,60W±1dB(8 frequency simultaneous output) 850-935 DDS, PLL on 868±2 MHz, 915±2MHz,100W±1dB 1180-1280 DDS, PLL on 1126±2MHz, 1225±2MHz,50W±1dB(8 frequency simultaneous output) 1550-1610 DDS, PLL on 1575.5±2MHz,30W±1dB(8 frequency simultaneous output) 2400-2500 DDS,100W±1dB 5150-5350 DDS,100W±1dB 5720-5860 DDS,100W±1dB |
||
Signal type |
DDS+PLL signal |
||
Total RF power |
≥500W |
||
Antenna |
Omnidirectional antenna,7 antennas |
||
Gain of the antenna |
≥5dBi |
||
Power Supply |
DC:+32V(able to connect with AC/DC,Lithium battery 28.8V (24-33.6V)) |
||
Total Power Consumption |
≤1500W(when all the frequency bands are turned on) |
||
Display and control interface |
PC,RAM no less than 4G |
||
Device dimension and weight |
Jamming main unit:600*420*240mm,weight:30kg Antenna:32mm * 60mm,weight:3kg Stationary installation rack:1500*700mm,supporting stick length:1000mm,weight:20kg |
||
Working Temperature |
-20~+50ºC |
||
Storage Temperature |
-30~+60ºC |
||
Operating Humidity |
5 to 95%, relative |
||
Surface Color |
Metal color conductive oxide and other color customized |
||
Cooling |
Device case + fan |
||
Water proof |
IP65 |