Long Range 10km Industrial Wireless GSM Cell Phone Signal Booster Extender Repeater

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Optical Fiber
• Model NO.: ZD-SB-456
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: ISO
• Condition: New
• Noise Figure (dB): ≤5
• Vswr: 1.5
• Frequency Range: 824 849MHz 890 - 915MHz
• Gain: 75-80
• Ripple: ≤3
• Output Power (dBm): 33
• Time Delay (Us): ≤5
• Trademark: ZD
• Origin: China
• HS Code: 85255000
• Production Capacity: 10000PCS/Month

Product Description

Outdoor Long Rang 10km Industrial Wireless Repeater Mobile Signal GSM Battery Wireless Repeater

Product Description
Wireless Repeater including Full Band Repeater, Band Selective Repeater; Frequency Selective Repeater,Fiber Optical Repeater; Frequency Shifting Repeater.

Today we draw your attention to our GSM Full Band Repeater.
Product Featurer

1, Application in entire edifice indoor-used or large area outdoor coverage.
2, Cover about 5000~ 10000 m² without block or obstruct.
3, High linear design, low interference to BTS.
4,High efficient fasion radiator, high-performance waterproof chassis, application in outdoor.
5,ALC function designed.
6,Manual gain control function.

Technical Specification:

Items		Testing Condition	Specification
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	824 - 849MHz 890 - 915MHz	869 - 894MHz 935 - 960MHz
Gain(dB)		Nominal Output Power-5dB	75	80
Output Power (dBm)		GSM modulating signal	33	33
ALC (dBm)		Input Signal add 20dB	Po≤±1
Noise Figure (dB)		Working in-band(Max. Gain)	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
Peak Phase Error(°)		Working in-band	≤20
RMS Phase Error (°)		Working in-band	≤5
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5

FAQ
 

• what is Wireless Repeater ?
• how to Classfity the repeater?
• How to choose the types of repeater?
• The meaning of each type of Repeaters i.e. GSM, CDMA, DCS & PCS
• What is meaning of saying the cellphone is single bandor dual band or triple band?
• Can we use the for all of these systems?
• How many user can use the repeater at the same time?
• About the basic terms you need as follows

What is Wireless Repeater?
The Wireless Repeater is one kind of equipment that amplify the signal in the wireless communications. The basic function of the repeater is to amplify the radio frequency signal. The repeater can pick up the signals that spread by the antenna and insulate the signals by the filter, amplify the filtered signals and recover the areas that needed.
 
The repeater is a relaying product, to scale the repeater is based on the intelligentized function, low in IP3, low noise figure, durability, and the good technical support.
 
The repeater is equipment that can be used in the areas that do not need the base station and need to be covered by signal, it is low in cost and easy in installation. The repeater can be used in the restaurants, hotels, air stations, train stops, gyms and so on to make your communication better.
 
How to Classfity the repeater?
1) Classfity by transmiting signal :GSM Repeater,CDMA Repeater ,DCS&PCS Repeater,3G Repeater
2) Classifity by install site : outdoor Repeater ,indoor Repeater
3) Classifity by Transmiting bandwidth: full(broad) band repeater, Band selective repeater,
4) Classifity by Transmiting solution: frequency shifting repeater, Fiber Optical Repeater
 
How to choose the types of repeater?
1) which signal of moibile you want to amplifier in blind or weak area of mobile signal (GSM,CDMA,DCS&PCS,3G,2.4G ect) You can know it from local telecom network operator
2) where you want to use the repeater.?
3)the area of coverage you want ,Squ meter?
4) How much bar of you mobile phone?
 
The meaning of each type of Repeaters i.e. GSM, CDMA, DCS & PCS
Ans: GSM Repeater netwrok including three frequency band : GSM 900MHZ,GSM1800MHZ,GSM 1900MHZ
The GSM 1800MHZ also called DCS In some country
The GSM1900MHZ also called PCS in some country.
So base on the aboving information ,our GSM repeater can support the ueser whose cell phone is GSM 900MHZ or GSM 1800MHZ or GSM1900MHZ.
CDMA is also a telecom network including two frequency : CDMA 800/CDMA2000 (450MHZ CDMA is called in some country)
So our CDMA Repeater can support whose cell phone is CDMA 800mhz or CDMA 2000MHZ
 
What is meaning of saying the cellphone is single bandor dual band or triple band?
Ans : the single band is GSM900MHZ or GSM1800MHZ or GSM1900MHZ mobile phone which can communication by the frequency band of telecom network
The dual band is GSM900MHZ and GSM1800MHZ mobile phone which can communication by the TWO frequency band of telecom network
Triple band is GSM900MHZ and GSM1800MHZ And GSM 1900MHZ mobile phone which can communication by the TWO frequency band of telecom network
 
Can we use the for all of these systems?
Ans : No you canot , it decied by the cell phone which use which telecom network :GSM CDMA .That is to say ,different cell phone use different system
 
How many user can use the repeater at the same time?
Ans: how many user which is relation with the base station , it is not relation with the repeater. that is to say ,the user is not limited use the repeater at the same time