|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Usage: | Signal Jammer |
| Type: | Wireless |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
50W 2000-6000MHz Power Amplifier Module with MCU for Institute
| Working Frequency | 2000-6000MHz | |
| Saturated Power Output | ≥47dBm | |
| Flatness @Psat | ±2dB Max. | |
| Gain Flatness | <4dB | |
| RF Input Drive | 5±2dBm | |
| Input and Output VSWR | ≤1.8 |
|
| Power On/Off Time | <10us | |
| Working Voltage | DC+28V | |
| Working Current | 5.5A | |
| Working Efficiency | ≥35% | |
| Harmonics @ Max. Power | >20dBc | |
| Non-Harmonics Spurious @Max. Power | >60dBc | |
| Impedance | 50ohm | |
| Power Supply Interface | Feed-through Capacitor | |
| RF Port | SMA-KFD | |
| Working Temperature | -40~+60ºC | |
| Monitoring Interface | 40cm cable 6pin connector by RS485 control 1) Amplifier Query: amplifier status (including amplifier status, over-temperature alarm, standing wave ratio alarm, amplifier fault alarm); 2) Amplifier Enable Switch: OFF-3.3V and ON-0V. And Internally Pulled-Low (0V), indicating the amplifier should be ON by default; 3) Over-temperature Alarm: the recommended threshold is +85ºC. When the detection temperature exceeds +85ºC, an alarm is triggered and the amplifier is switched off. When it reaches +65ºC, the amplifier is switched on; 4) Standing Wave Alarm: When the standing wave detection exceeds 5:1, the amplifier automatically switchs off; 5) Overvoltage and Undervoltage Alarm: When voltage exceeds 32V &below 24V, the amplifier automatically switchs off; 6) Overcurrent Alarm: When current exceeds 15A, the amplifier automatically switchs off; 7) Reverse Polarity Protection. |
|
| LED Indicator | POWER: amplifier power indicator; RUN: amplifier operation indicator; ALARM: amplifier fault alarm indicator. |
|
| Amplifier Size | 140×70×20mm | |
| Installation Size | 133.5×63.5×20mm |
){kind=link}