Customization: | Available |
---|---|
Usage: | Mobile phone, Power Amplifier Module |
Type: | Wireless |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Test items | Specs | Remark | |
Frequency | 700-2700MHz | ||
Operating voltage | 30V | 28-32V | |
Maximum output power | 53±1dBm | ||
Operating current | ≤23A | ||
Controllable output power | 200W | ||
Gain | 45±2.0dB | ||
In-band fluctuation | ±2dB | peak | |
Maximum allowable input power | ≥+10dBm | Duration 1min without damage | |
Input voltage VSWR | ≤1.50 | Add +28V, standard network output -10dBm | |
Output voltage VSWR | ≤1.50 | Without power, standard network output -10dBm | |
≤1.50 | Power up, dual directional coupler test | ||
High and low temperature test | Working environment temperature | -10~+55ºC | Low temperature can start, monitoring work normally |
Gain Stability | ±1.5dB@-10ºC~+55ºC | ||
Power Stability | ±1.5dB@-10ºC~+55ºC | ||
Power supply requirement | ≥8A @+30Vdc; | continuous wave output 200W | |
Power supply, control interface 7W2 |
A1:VCC+28V; A2:GND 1: TEMP_AL: Temperature detection AD Voltage value 2: RUN: Forward power detection AD Voltage value 3: VSWR_AL: standing wave alarm, high level alarm, low level cancellation. 4: PA_EN : enable switch; high level 3V~5V on, low level <2V off. 5: PA_ADJ: Power regulation input 0~5V voltage, 0V attenuation max, 5V no attenuation |
||
RF output connector | N-F | ||
Module dimension | 186*94*26mm | ||
Module protection | Temperature compensation, over-temperature protection, standing wave protection | ||
LED module indicators | POWER: power indicator, RUN: power operation indication, VSWR: standing wave warning indication |