|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Frequency Range: | 30MHz-3000MHz |
| Gain: | 0dBi |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DF frequency range | 30MHz-600MHz 600MHz-3000MHz |
Antenna Gain | ≥0dBi (typical value) |
Antenna Non-circularity | ≤3dB (typical value, design guaranteed) |
VSWR | ≤2.5:1 |
Polarization | Vertical |
Characteristic Impedance | 50Ω (nominal) |
Antenna Array Configuration | 30-600MHz: Five-element circular array 600-3000MHz: Five-element circular array Two-layer coaxial installation, with low-band antenna arms foldable |
Antenna Array Aperture | 30-600MHz: 1200mm 600-3000MHz: 252mm |
Low-band Element Length | 680mm |
Active Antenna Section | Output second-order intercept point: ≥45dBm (design guaranteed) Output third-order intercept point: ≥30dBm (design guaranteed) |
Consistency Between Array Elements | 30-600MHz: Amplitude inconsistency ≤2dB(RMS),Phase inconsistency 3° (RMS) 600-3000MHz: Amplitude inconsistency ≤2dB (RMS),Phase inconsistency 5° (RMS) |
Element Antenna Receiving Sensitivity | 30-600MHz: ≤10 μV/m (typical value, S+N/N=3dB, BW=15kHz); 600-3000MHz: ≤15 μV/m (typical value, S+N/N=3dB, BW=15kHz) |
Burnout Resistance Power | 1W continuous wave (design guaranteed) |
Switching Time Between Two Frequency Ban | ≤1ms (design guaranteed) |
Switching Time Between Different Channels In The Same Frequency Band | ≤1μs (design guaranteed) |
Power Supply Input | 9-36VDC (occupies 4 pins in the control interface) |
Power Consumption | ≤24W |
Color | Painted GY05 brown-green (orange peel texture). The mounting adapter and support feet on the antenna base are black |
Temperature | Operating temperature: -40℃ ~ +55℃ Storage temperature: -50℃ ~ +65℃ |
Damp Heat | Alternating damp heat test per GJB150.9A-2009: 95%±5% (alternating damp heat at +30℃ and +60℃; relative humidity may drop to 85% during temperature decrease). One 24-hour cycle, total 10 cycles |
Sand And Dust | Meets GJB150.12A-2009 test method |
Shock | Meets GJB150.18A-2009 test method. In backpack carrying state, tested according to Procedure IV of GJB150.18A-2009. Dropped once each from 1 meter height onto the bottom, left side, right side, and outer side using free fall. Equipment performance and structure shall remain intact |
Vibration | In transportation state, meets GJB150.16A-2009. Frequency: 10Hz~500Hz. Vertical axis: 1.04grms, Longitudinal axis: 0.74grms, Lateral axis: 0.204grms. Three axes, 1 hour per axis. Equipment not operating |
Plateau Adaptability | Suitable for altitudes of at least 5000m |
Immersion | 1 meter water depth for 30 minutes |
Mold | Capable of inhibiting mold growth. Mold growth rating: Grade 2 |
Salt Spray | Meets the requirements of GJB150.11A-2009. The antenna shall use corrosion-resistant materials and treatments. It can operate normally for long periods under salt spray sedimentation rate of (1~3) mL/(80cm²·h) |
Wind Resistance | The equipment can operate normally in Level 6 winds and will not be damaged in Level 8 winds |
){kind=link}