X-Band 8.5-9.6GHz up Down Frequency Conversion Module

• Customization: Available
• Frequency Range: X Band
• Frequency: 8.5-9.6GHz
• Model NO.: ZD--8.5/9.6
• Application: X-Band
• Frequency Band: X Band
• Frequency Band Range: 8.5-9.6 GHz
• Input Signal Type: Pulse
• Input Pulse Width Range: 0.1 Us~200us
• Duty Cycle: 20%
• Input Drive: -5~+5dBm
• Input RF Frequency: 8.5-9.6 GHz
• Noise Factor: <4db
• Maximum Input Power: 10W
• Enter P1db: -10dBm (When The Gain Is 20db)
• Lo to If Leakage: -60db
• Intermediate Frequency Attenuator: 31.5 Db 0.5 Db Step (Controlled by RS422)
• Output P1db: 10±1 dBm
• Frequency Gain Flatness: ±1 Db
• Spurious Harmonic: ≥70 Dbc
• Transport Package: by Box
• Specification: 120x100x10(LxWxH)
• Trademark: ZD TECH
• Origin: China
• HS Code: 8543209090
• Production Capacity: 2000pieces/Month

Product Description

•Wide Frequency Range: Operates in X-Band with a frequency range of 8.5-9.6 GHz for versatile applications.

•High Output Power: TX output power reaches 40 watts or more via N-type connector.

•Low Noise Factor: RX noise factor is less than 4dB ensuring high signal quality.

•Advanced Protection: Includes protection against overheat, backpressure, high voltage, high current, and short circuits.

•Precise Attenuation Control: Intermediate frequency attenuator offers 31.5 dB with 0.5 dB steps controlled by RS422.

•Fast RF Switching: SPST RF switch provides 60dB isolation with establishment time under 50 nanoseconds.

•High Spurious Rejection: Spurious harmonic suppression is greater than or equal to 70 dBc.

•Compact Standard Design: Standard dimensions are 120x100x10 mm (LxWxH) for easy integration.

Technical Parameter

Power characteristic	Indicator parameters
model	X-bond 8.5/9.6
TX
frequency range	8.5-9.6 GHz
Input signal type	pulse
Input pulse width range	0.1 us~200us
duty cycle	20%
Input drive	-5~+5dBm
The output power of N-type connector	≥40 watts
Maximum pulse width of pulse droop	≤0.5 dB
spurious harmonic	≤60 dBc
Group delay variation in IF bandwidth	<15ns
protect	Protection must be implemented for maximum duty cycle and open antenna port conditions (VSWR=∞), with no time constraints.
	Backpressure, High Voltage, High Current, and Short Circuit Protection
	overheat protection
RX
Input RF frequency	8.5-9.6 GHz
noise factor	<4dB
maximum input power	10W
RF switch	SPST-60dB isolation <50nS establishment time
Enter P1dB	-10dBm (when the gain is 20dB)
LO to if leakage	-60dBc
acquire	20-60 decibels
intermediate frequency attenuator	31.5 dB 0.5 dB step (controlled by Rs422)
output P1dB	10±1 dBm
frequency gain flatness	±1 dB
spurious harmonic	≥70 dBc
spur	Input port load ≥100 dBc
image suppression	≥60 dBc