|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Usage: | Signal Jammer |
| Type: | Wireless |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Items | Technical Parameters | |
| Working frequency | 2300~2400MHz | |
| Bandwidth | 100MHz(DDS) can be customized | |
| Saturated power output | 50±1dBm | |
| Gain | 50±1dB | |
| In-band flatness | ≤2.0dB | |
| Power stability | ±1.5dBm(at -25°C~+55°C) | |
| Output VSWR | ≤1.5 |
|
| Operating voltage |
DC28±1.0V | |
| Operating current | 10.0A typ; 11.0A max.(@ Pout=100W CW, 50 ohms load) |
|
| Operating temperature | -25°C~+55°C | |
| Relative humidity | 5%~95%,No condensation | |
| RF port | N-K | |
| Power supply monitoring interface | Power supply:7W2 power seat A1: GND A2: +28V Pin1: RS485A Pin2: RS485B Pin3: NC Pin4: NC PIN5: Power amplifier enable switch, +12V on, 0V off. |
|
| Alarm and LED indication | TEMP: LED indication for temperature alarm. VSWR: LED indication for VSWR alarm. VCC: LED indication for Over voltage/ Under voltage. P-OUT: LED indication if module not radiating. ENA: LED indication for Module switch ON/OFF. |
|
| Monitoring type | RS485, baud rate 19200 | |
| Monitoring function | 1. Module status (including power amplifier status, over-temperature alarm, standing wave ratio alarm, power amplifier alarm reading, temperature value/reading, voltage value/reading, forward power, reverse power, input power, output power value reading); 2. Power amplifier enable switch: turn the power amplifier on or off. 3. Temperature alarm: The temperature threshold is +75ºC. When the detected temperature exceeds +75ºC, the alarm will be triggered and the power amplifier will be turned off. When the temperature reaches +65ºC, the power amplifier will be turned back on; 4. Power amplifier standing wave alarm: When the standing wave detection of the power amplifier is greater than 4.0, the power amplifier starts protection; 5. Power amplifier over/under voltage alarm: When the power amplifier voltage exceeds 32V, the power amplifier automatically shuts down; 6. Power amplifier undervoltage alarm: When the power amplifier voltage is less than 24V, the device will automatically shut down. 7. Indication when the power amplifier does not radiate: When the output power is less than 10W, it is considered that the power amplifier does not radiate power. 8. Indication when the module is turned on/off: when the software is enabled or the manual physical switch is turned on or off. |
|
| Amplifier dimension | 170*79.5*34 mm | |
| Installation dimension | 164*73.5*34mm | |
| Mounting screw dimension | 4-Ø3.2mm |
){kind=link}