| Customization: | Available |
|---|---|
| Usage: | Mobile phone, Power Amplifier Module |
| Type: | Wireless |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item name | Technical parameters | Remarks |
| Frequency Band (MHz) | 700-960 | |
| Max. Output Power (dBm) | >=53 | |
| Max. Gain(dB) | 53±1.5 | customizable |
| In-band Fluctuation (peak-to-peak) (dB) | ≤1.5 | |
| Spurious Emissions | 9kHz~1GHz≤-36dBm | RBW= 100kHz |
| 1GHz~12.75GHz≤-30dBm | RBW= 1MHz (excluding SEM test band) | |
| VSWR | ≤1.6 | |
| Supply Voltage(V) | 32V | |
| Working Current (A) | ≤20A@full power | |
| Working Temperature(ºC) | -40~+55 |
| Power supply interface | M4.0 feedthrough capacitor | |
| RF port | ANT IN ->ANT input port: SMA ANT OUT->ANT output port: N |
customizable |
| Switch control | M2.5 through-core capacitor: high level turns on; low level turns off | The high level voltage is 2.5V |
| Output open circuit alarm | M2.5 feedthrough capacitor: high level open circuit alarm | |
| Communication monitoring | 1*4Pin 2.5 pitch Pin 1: A; Pin 2: GND ground; Pin 3:B; Pin 4: NC; |
| Item name | Technical parameters | Remarks |
| Temperature detection error | ≤3ºC | |
| Downlink output power detection | ≥20dB,(P0+2-P0-18) | |
| Open circuit protection | VSWR>2.5 dB,PA switch off, the indicator light will alarm, and restart to recover. | automatic |
| Overheating protection | ≥90°C switch on, ≤65°C switch off | automatic |
| embedded software environment | Fully connected to RS485; ability to control actual temperature, outflow rate, descending road decline control |
| Item name | Technical parameters | Remarks |
| Material | aluminum | |
| SIze(mm) | L220*W118*H27 | reference |
| Installation fixed hole spacing size | M4 |
){kind=link}