| Customization: | Available |
|---|---|
| Usage: | Signal Jammer |
| Type: | Wireless |
|
Still deciding? Get samples of US$ 3000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| RF technical parameters | |||
| name | DDS High frequency signal generator spec | ||
| Item | Parameter | Remark | |
| Frequency | 5100-5900 MHz | High frequency | |
| Working voltage | 28V | 12-30V | |
| Max output power | 4±1dBm | typical | |
| VSWR | ≤1.5 | No power, standard network output -10dBm | |
| ≤1.5 | Power On, Dual Directional Coupler Test | ||
| High and low temperature test |
Working environment temperature (ºC) | -10~+65ºC | Low temperature can start, monitoring works normally |
| Gain Stability | ±1dB @-20ºC~+55ºC | ||
| power stability | ±1dB @-20ºC~+55ºC | ||
| Power Requirements | ≥0.8A @+28Vdc; | ||
| Power supply interface, monitoring interface RS485 | 7W2 | male | |
| RF connector | SMA-F | ||
| dimension | 123mm * 107mm * 20mm | ||
| Appearance (how to use) | Aluminum cavity form (no need to add radiator) | ||
| Software settings | |||
| Monitoring function | Description | Remark | |
| Signal generator setting | Frequency setting mode 1 |
Setting within a single frequency range | Frequency setting accuracy 1M |
| Frequency setting mode 2 |
Set the sweep mode, frequency, interval, step and other parameters can be set | ||
| Frequency setting mode 3 |
Set any 4 sub-frequency segments within the bandwidth, and a single sub-segment needs to be incremented | ||
| module communication | RS485 | ||
| Interface definition | +:28V,-: GND; control: 1:485A+,2:485B- | ||
){kind=link}