7 Band Anti Drone Jammer in Rack Version

• Customization: Available
• Frequency Range: GSM900
• Frequency Band: 900m, 1.2g, 2.4G, 5.2g, 5.8g
• Model NO.: ZD-UJR-7B-640W
• Working Voltage: AC100-240V or 12V Car Charger (300mm Long)
• Running Temperature: -20ºC to +70ºC
• Antenna: 380mm Long
• Channels: 5 Antenna 5 Channels
• Transport Package: by Box
• Specification: 75*35*50cm
• Trademark: ZD TECH
• Origin: China
• HS Code: 8543209090
• Production Capacity: 2000pieces/Month

Product Description

Application Sites:

Dedicated to the open environment fieldor larger area places of fixed UAV jammers, such as: prisons, schools, troops, large factories and mines, enterprises, industrial parks, electric power, petroleum and petrochemicals, etc..

Technical parameters:

1. UAV countermeasures in urban areas 3-5km, based on frequency hopping drones;
2.7-bands high gain panel directional antenna, horizontal angle 90 degrees, gain 2.4G>15dBi, 5.8G>17dBi;
3. Major band signal source with modulated noise withbetter UAV countermeasures;
4. Module protection: each module is protected with operating instructions, standing wave protection, over-temperature alarm and automatic shutdown protection;
5. RF transmitting power <640W, power consumption of the whole machine: 1624W, DC current: 49A, AC current: <7.4A;
6. Output channels: 7 channels,single module with power throttling and adjustable counter distance;
7.good heat dissipation system, can be used outdoors for a long time 24 hours on; can also be used together with the UAV detection;

Detailed technical parameters:

1: RF technical parameters:
 

Frequency band	Chanel	Working Frequency	Output power	Current	Application
	CH1	433-455MHz	100W	6A	Graphical transmission rocking control
	CH2	868-915MHz	100W	7A	Graphical transmission rocking control
	CH3	1160-1290 MHz	100W	8A	GNSS-L2+L5
	CH4	1570-1620MHz	100W	8A	GNSS-L1
	CH5	2400-2500MHz	140W	11A	Graphical transmission rocking control
	CH6	5150-5350MHz	50W	4.5A	Graphical transmission rocking control
	CH7	5725-5850MHz	50W	4.5A	Graphical transmission rocking control

2: Directional plate antenna parameters: 1pc:

1

Combined Antenna

(L*W*H):1280mmx285mmx130mm

Gain>15dBi

H: 90 degrees V: 60 degrees

3: Chassis shell parameters:
 

Host Size	L*W*H:780*530*325mm
Total Weight	<60Kg;
ambient temperature	-20ºC~55ºC
Relative humidity	35~85%
AC-220V power consumption	<1470W
power input	AC 100V~240V
Installation Environment	Wall/Pole
installation height	5~15m
shell material	Iron paint

4: Packing list of the whole machine

name	qty	Unit
host	1	PCS
antenna	2	PCS
feeder	7	PCS
power supply line	1	PCS
computer control software	1	PCS
U-shaped screw bolt (for pole mounting)	3	SET

Tips:
1, the factors affecting the scope of JAMMING include and are not limited to: the distance relative to the base station, orientation, the presence of obstacles, the material of the walls of the site building, the installation height of the equipment, installation specifications, etc..
2, each antenna has a band identification, must correspond with the band identification on the host, before THE JAMMER powered on, must ensure that each antenna is connected reliably. Never allow the use of the power on without connecting the antenna.
3, this anti-system equipment can be wall-mounted, can also be installed on the pole with a hoop; installation height is recommended to be 3 to 15 meters.
4,for outdoor installation, ensure the host and antenna are below the lightning rod.
5, the anti-system equipment is a high-power models, high-power jammer for building jamming coverage, the jammer can not be installed in the building (the steel structure of the wall willbring big attenuation of signal transmission), and should be installed in front of the target or be rear of it in 20 ~30 meters location, while the installation height should be appropriate, and no any obstacles among the antenna and the target building.