Ultra Bands 6-7g High Power 50W Amplifier Module for Jammer

• Customization: Available
• Usage: Mobile phone, Signal Jammer
• Type: Wireless
• Model NO.: ZD-PA-6/7GHz-50W
• Support Network: WiFi GPS GSM
• Information content: Data
• Certification: ISO
• Condition: New
• Frequency Band: Customized
• Working Voltage: 32V Max
• Output RF Port: SMA-Kfb
• Current Consumption: 12A
• Transport Package: by Box
• Specification: 155*92*25MM
• Trademark: ZD TECH
• Origin: China
• HS Code: 8517709000
• Production Capacity: 2000pieces/Month

Product Description

PA 6-7GHZ-50W Solid state power amplifier technical specification

Product Features
•   Frequency from 6000-7000MHz
•   Class AB GaN design
•   Instantaneous wide bandwidth
•   50 Ohm Input/Output impedance
•   Small size and Light weight
•   High reliability and Ruggedness

Description
The ZD-PA-6/7GHz-50W is designed for general purpose. Operating frequency range is from 6000-7000MHz. Gallium Nitride on SiC Technology is used and attached on a copper sub carrier.
Improved thermal handling by patented technology.

1. Main technical parameter 

Test Item		Indicator	Remarks
frequency		6000-7000MHz
working voltage		32V	28-34V
Maximum output power		47±0.5dBm
Operating current		7A	@50W typical
Controllable output power		30W~50W	ALC adjustable
ALC power regulation range		≥3dB	Voltage controlled attenuation
gain		47±1.0dB	Peak to Peak
Intraband fluctuation		±2dB	Lasts for 1 min without damage
Maximum allowable input power		≥+10dBm	Add+28V, standard network output - 10dBm
Input voltage standing wave ratio		≤1.50	No power on, standard network output - 10dBm
Output voltage standing wave ratio		≤1.50	Power on, dual directional coupler test
		≤1.50	Low temperature can be started and monitoring works normally
High and low temperature test	Working ambient temperature (ºC)	@50W typical	Low temperature can be started and monitoring works normally
	Gain stability	±1.5dB@-10ºC~+55ºC
	Power stability	±1.5dB@-10ºC~+55ºC
Power supply requirements		≥9A @+36Vdc;	Continuous wave output 100W
Power supply, control interface 7W2		A1:VCC+28V;    A2:GND 1:TEMP_ AL: Temperature detection, high-level alarm, low-level cancellation; 2: RUN: High level operation indication; 3:VSWR_ AL: Standing wave alarm, high-level alarm, low-level cancellation; 4:PA_ EN: Enable switch; High level 3V~5V open, low level<2V close; 5:PA_ ADJ:NC
RF output connector		N-F
Module protection		Temperature compensation, overtemperature protection, standing wave protection
Signal source input		Built-in high-speed noise modulation signal source
LED module indicator light		POWER: power indicator, RUN: power operation indicator, VSWR: standing wave alarm indicator

2.Main function index: Control parameters include: on/off control;


3. Interface Definition

Interface code	interface type	interface function	Notes
J1	SMA-K	Radio frequency input
J2	N-K	Radio frequency output
J3	D-SUB5W5	Power supply and control	A1-A2:+28V A3-A5:GND

Operating Voltages
 

PARAMETER	UNIT	NOMINAL VOLTAGE	VOLTAGE ACCURACY	SYMBOL
Operating Voltage	V	28-30	± 2%	VDC
HPA Enable Voltage	V	-
Current Monitor Voltage	V	-
Temp Monitor Voltage	V	Output Voltage 0.75V@25ºC (1ºC/0.01V)

Mechanical Specifications
 

PARAMETER	UNIT	TYP
Mass	kg	0.75
Dimension	mm	155*92*25 (Without Connectors)
RF Connector	-	MCX Female : RF Input
		N Female : RF Output
DC Connector	-	Through core capacitor, Male : Supply
Cooling		External Heat-sink Required

Pin Description
 

Pin No	Description	Pin No	Description
A1	-	1	RS485B
A2	-	2	External TTL
A3	-	3	External TTL
A4	-	4	NC
A5	-	5	RS485A
A6	-	6	GND
A7	-	7	GND
A8	-	8	NC