100W 5150-5900MHz High Power Anti Drone Amplifier RF Moduler for Jammer

• Customization: Available
• Usage: Mobile phone, Power Amplifier Module
• Type: Wireless
• Model NO.: ZD-WDPA-5150/5900MHz-100W
• Support Network: WiFi GPS GSM
• Information content: Data
• Certification: ISO
• Condition: New
• Frequency Band: 400-760MHz
• Working Voltage: DC+28V
• Output RF Connector: N-F
• Working Current: <8A
• Transport Package: by Box
• Specification: 140*71*20mm
• Trademark: ZD TECH
• Origin: China
• HS Code: 8517709000
• Production Capacity: 2000pieces/Month

Product Description

PA 5150-5850MHz 100W Solid state power amplifier technical specification

Product Features
•   Frequency from 5150-5900MHz
•   Class AB GaN design
•   Instantaneous wide bandwidth
•   50 Ohm Input/Output impedance
•   Small size and Light weight
•   High reliability and Ruggedness

Description
The ZD-WDPA-5150/5900MHz-100W is designed for general purpose. Operating frequency range is from 5150-5900MHz. Gallium Nitride on SiC Technology is used and attached on a copper sub carrier.
Improved thermal handling by patented technology.
 

1.RF technical parameters:

Item		target	remark
Frequency		5150-5350MHz/5700-5900MHz
Working volatge		30V	28-32V
Max output power		49±1dBm
Working current		7.5A	@80W typical case
Controllable output power		50W~100W
ALCpower regulation range		≥3dB	Voltage-controlled attenuation
Gain		50±1.0dB
Intraband fluctuation		±2dB	Peak to peak
Max allowable input		≥+10dBm	Lasts for 1 minute without damage
Input volatge standing wave ratio		≤1.50	Add +28V,standard network output-10dBm
Input volatge standing wave ratio		≤1.50	Without power on,standard network output -10dBm
		≤1.50	Power on, dual directional coupler test
Temperature testing	Working environment temperature(ºC)	-10~+55ºC	Low temperature can start,monitoring is normal
	Gain stability	±1.5dB@-10ºC~+55ºC
	Power stability	±1.5dB@-10ºC~+55ºC
power supply requirement		≥8A @+30Vdc;	Continuous wave output 100W
Power supply,control interface 7W2		A1:VCC+28V;   A2:GND 1:TEMP_AL: temperature alarm 2:RUN: Running instructions. Power, high level. No power, low level. 3: VSWR_AL:vswr alarm, high level alarm, low level elimination; 4:PA_EN : Enable switch; High level 3V~5V open, low level <2V closed;
RF output connector		N-F

 
2.Main function index: Control parameters include: on/off control;

Operating Voltages
 

PARAMETER	UNIT	NOMINAL VOLTAGE	VOLTAGE ACCURACY	SYMBOL
Operating Voltage	V	DC+28V	± 2%	VDC
HPA Enable Voltage	V	-
Current Monitor Voltage	V	-
Temp Monitor Voltage	V	Output Voltage 0.75V@25ºC (1ºC/0.01V)

Mechanical Specifications
 

PARAMETER	UNIT	TYP
Mass	kg	0.75
Dimension	mm	130*117*26 (Without Connectors)
RF Connector	-	SMA-KFD : RF Input
		N Female : RF Output
DC Connector	-	Through core capacitor, Male : Supply
Cooling		External Heat-sink Required

Pin Description
 

Pin No	Description	Pin No	Description
A1	-	1	RS485B
A2	-	2	External TTL
A3	-	3	External TTL
A4	-	4	NC
A5	-	5	RS485A
A6	-	6	GND
A7	-	7	GND
A8	-	8	NC