portable Suitcase Blocker High Gain Block All Frequencies Signal Jammer

• Customization: Available
• Frequency Range: 20m-6000MHz(Customizable Frequency Point)
• Frequency: 850-2500MHz
• Model NO.: ZD-SJ-70W-14B
• Customization: Available
• Transport Package: Safe Case Packing
• Specification: Host Size: 430*370*200mm
• Trademark: ZD TECH
• Origin: China
• Production Capacity: 500PCS/Month

Product Description

 

Product Description

Portable Signal Jammer

(ZD-SJ-70W-14B)

1.: Application places.

This small power portable detonation signal jammer , can be used in no-fly zones for drones, luxury homes, scenic spots, oil stations (depots), power systems, important leaders/VIP security, single combat, special teams, detonation teams, anti-terrorism units, anti-drug units, explosion-proof teams, security checkpoints, administrative law enforcement, hostage negotiations, border control and security forces and other types of applications.

2.: Technical parameters.
1: Omni-directional antenna signal shielding range radius 2m-20m, depending on the signal field strength of the nearby base station.
2: portable design, lightweight, convenient for mobile applications such as detonation.
3: output channel single 14 channels, RF transmit power not higher than 30W, single channel <2W.
4: Shield 2G, 3G, 4G, 5G, wireless remote control, etc. (frequency can be customized);
5: Signal system: analog plus noise processing mode;
6: Protection function, temperature alarm and standing wave protection function.
7: Intelligent heat dissipation system, plus fan cooling, can be used continuously on.
8: Built-in 8.4V-30A battery for continuous use greater than 1 hour; External charger.
9: The standard configuration of antenna is omnidirectional antenna, also can be changed according to the need of directional antenna, shielding effect will be better.
10: excellent production technology, main chassis ABS plastic shell.
11: Multiple sets of super cooling fans and super thick cooling teeth, even in high temperature environment can ensure the best working condition.
3.: Detailed technical parameters (one of the following frequencies can be selected).

Frequency band parameters	Channel	Signal type	RF Power
	CH1	315MHz	5W
	CH2	433MHz	5W
	CH3	758-803MHz	5W
	CH4	861-894MHz	5W
	CH5	925-960MHz	5W
	CH6	1805-1880MHz	5W
	CH7	2110-2170MHz	5W
	CH8	2620-2690MHz	5W
	CH9	3400-3600MHz	5W
	CH10	3600-3800MHz	5W
	CH11	1222-1232MHz	5W
	CH12	1565-1609MHz	5W
	CH13	2400-2500MHz	5W
	CH14	5150-5850MHz	5W
Mainframe dimensions (L*W*H)	370*300*190mm(without carrying handle)
Antenna size	Length 200mm, Diameter 16mm

Antenna type	High Gain omni antenna(14 sticks),Rod Antenna
Power supply method	AC: 110V~240V, or Built-in battery power
Power consumption of the whole machine	<150W
Weight	<3Kg
Temperature / Humidity	-20ºC-+50ºC/≤80%
Complete machine reliability	MTBF not less than 1000 hours
System response time	No more than 30 seconds (from power on to system normal operation time)
Case design	ABS plastic housing

4.: Notes

1: antenna installation notes

1. First screw the FRP antenna and the port marked on the mainframe one by one to the mainframe, make sure the connection is firm and stable.
2. After power on, please wait for about 1 minute, check the antenna interface again, if you find that the temperature rises abnormally, it may be caused by poor contact between the feeder cable and the output connector, please power off immediately, unscrew the feeder cable and connector, then connect again carefully.

2:Operating Notes:

a. When you receive the machine, please unpack it carefully, check the appearance and accessories, and do not open the machine without necessity.
b. Before powering up the machine, please check that all the antennas are connected and that they are in good contact. It is strictly forbidden to operate the machine without the antenna connected, otherwise there is a risk of damage to the machine.

3:Safety Notes:

a. In rainy weather, do not open the box to avoid short circuit damage caused by rain entering the chassis.
b. When the machine is powered on, do not touch the electrically charged parts during the switch operation to prevent electric shock.
c. When the machine is powered on, the cooling fan is turned on and the blades rotate at high speed, do not touch the rotating blades of the cooling fan with your hands when operating the equipment to avoid injury.
d. The installation of the equipment comes with the corresponding installation accessories, which need to be installed by professional engineers during installation.